Disability Aids, Mobility Aids, Healthcare Aids, Occupational Therapists, Sports Injuries

More Products
- Patient Alarms
- Patient Monitors
- Mobility
- Safety
- Around The Home

Adjustable Cot Sides

Adjustable in width, length and height to fit virtually any divan bed. The quick and simple adjustment allows the bed to be installed on a small single, single, double or king-size bed. The base frame fits between the mattress and the bed base to add stability. The height can be easily adjusted using the pin clip system. By a simple push of the quick release button, the cot side drops down. The cot sides can be simply removed to give access for making the bed. Bed width 762 to 1524mm (30 to 60"). Side rail length 1300 to 1843mm (51.25 to 72.5"). Height of top rail over bed base 430 to 525mm (17 to 20.75").

Call Button
The call button can be either wall mounted or used as a pendant. When pressed a signal is sent to the monitor using wireless technology. The range is approximately 150 metres. The monitor will identify the call button by displaying the number on the panel and provide an audio alert. If a pager is used a signal is also sent to the carer’s pager with a voice announcement of the call button location number. Each call button is supplied with 1 x A23 12v battery. 1 x Call Button.

Home Safety Alert
A wireless calling alarm system with one main receiver unit and two pendant calling transmitters. Call button and Panic button on each pendant. The main unit receives and recognises who is calling and the urgency using different sound and coloured light signals. A quick reset button on the main unit can cancel the call or alarm. Each transmitter uses 1 x 23A 12v battery (included) and the receiver unit is powered by a 6v adaptor (included) or 4 x AA batteries (not included).

Wireless Alert Call System
This innovative, wireless alert call system assists the carer by watching over the patient, alerting once any unscheduled movement is made and/or the patient is in need. By actively using the call button, the patient can immediately alert the carer when assistance is required. The optional motion or door sensors alert the carer when the patient vacates the room. This cost effective system is designed to be flexible for small-home or special area use. Designed for the smaller care home of up to 30 beds. The system is easy and quick to install and involves no cables. The button number is displayed and announced at the display panel and, most importantly, announced at the pager. This means that the carer is instantly informed of the ID of the caller. The combination of the wireless operation and audio facility gives maximum mobility to both the patient and the carer. Starter Pack includes – 1 x Monitor, 1 x Pager, 4 x Call Buttons.

Easy Access Bedside Mat
With a thickness of 50mm (2") and an angled edge, wheelchairs can easily roll on or off the mat. Made from high density foam with a vapour permeable cover with a non-slip base. The mat can be easily folded away, using the supplied securing strap and handle for transportation or storage. Can be easily wiped clean. Length 1700mm (67"). Width 650mm (25.5"). When folded length 850mm (33.5").

Home Care Watch CCTV Camera
This useful wireless CCTV monitoring system has a 38mm (1.5") screen and a day/night sound activated camera. The camera unit sends audio and colour motion to the monitor unit and can also send video footage to a standard TV on a channel selected by the user. It also has a night vision mode for monitoring after dark. The system is portable to allow monitoring anywhere in the home and has a range up to 100 metres. Powered by mains adaptors (included) or 6 x AA batteries (not included). The monitor is supplied with rechargeable batteries and a charger unit. Camera measures 130 x 90mm (5 x 3.5"). Monitor screen 25 x 33mm (1.25").

Cot Side Bumpers
Made from thick foam, covered with vapour permeable, wipe clean fabric. These cot bumpers are made to fit a variety of cot sides and are easily fastened in place. Supplied as a pair. Length 1524mm (60"). Depth 381mm (15"). Weight 1kg each.

Wireless Doorbell With Light & Panic Alarm
An easy to fit, doorbell and pager system. Consists of push button unit, doorbell unit with flashing LED light and panic button. The units are self contained and no wiring between them is needed. The doorbell can either be fixed permanently or remain portable. Operating range 100m. Fixings for push button and doorbell units supplied. 12 volt (A23) batteries for push button unit and panic button supplied. The doorbell unit requires 2 x C batteries (not supplied).